Request for Access to Links

There was a recent update that has caused my Google Doc links to stop working. Please send me a request for access to the files until I can get them up and running again. I will grant you access through the email as soon as I am able to, thank you!

4.04.2012

Large Chicken Wire Frame and Barnwood Painting Technique

I'm not going to call this a tutorial because I know there are better ways of doing this, so today I'm going to show you one way to make a large chicken wire frame (not necessarily the best way). 

Valentine Mantel with Natural Elements
This project took almost a year to finish, can you believe it took me so long!?  I started it the end of May last year and didn't finish it until this last February.  Have any projects like this?   I had a grand vision of how it was all going to go together so perfectly until I got started on it and it all fell apart--literally!

Here's the story...

I started with 3- 1x3x8's (really measure 5/8" x 2 1/2 x 8).  These boards are cheap--like less than $2 each. You could also use 4- 1x3x6 boards.  They were cut into four - 4' lengths, and four- 2' lengths.  (Lowe's and Home Depot will cut them for you.)

My dad gave me an old piece of chicken wire that he didn't need, so that was free.  Sorry, I haven't priced it out so I don't know how much it would cost to buy new.


I first applied glue to the inside edges of the boards and used these little joint brackets (the metal piece in the picture below) to hold the boards together.  There were so many joints in the frame, and it was so big, that it wasn't strong at all.  The frame wobbled and moved to the point that some of the joint brackets fell right back out, it broke apart in places where it was glued, and the frame pretty much fell apart.  It was so frustrating I gave up on it and set it aside. 

The pieces of wood sat in my storage room (where I keep my unfinished projects) for 10 months  until the day I became determined to use it for my Valentine Mantel and finally figured out a way to fix my problem that didn't involve spending any more money on it--(no big surprise if you're a regular reader) I used paint sticks! 


I cut the paint sticks, pre-drilled holes into the wood frame, and then used screws I had on hand to attach the paint sticks and secure the corners of the frame.  (Make sure the screws are short enough that they won't go through to the front.) When it actually worked I was so, so happy!

The frame though is still only as strong as the paint sticks so I used a few of the metal joint pieces and glued all of the boards together as well.  I think a better solution would have been to cut a thin board out into the shape of the corner and glue and then screw it to the frame.  Our jigsaw is a cheap piece of junk though and won't cut even a straight line, so that wasn't an option for me. (A new one is on my wish list!)


I used a staple gun to attach the wire, be sure to wear safety glasses.  Staple the centers of the top, bottom, and sides, pulling the wire as tight as you can.  Position the staple over the wire so the wire doesn't slip on the staple when you let go of it.  Staple around the edges pulling it tight as you go.   It would be a good idea to wear some thin gloves to protect your fingers when you are pulling the wire tight.  I wish I had, my fingers were pretty sore by the time I was done.  It would have been nice to have someone to help with this step too.  Use wire cutters to trim off the extra wire.


The painting didn't start out any better than the frame did, but in the end was just what I was going for.  I first painted it with Heirloom White spray paint and then stained over the top of it with Minwax dark walnut stain.  It wasn't what I was hoping for, so I used a cloth rag and lightly wiped on some Alabaster white paint over it (allowing the other colors to show through in places) followed by some light sanding and more dark walnut stain.  I was going for the old weathered look and it was looking a little too brown, so I used a rag again and lightly wiped over it with a dark glaze, applying it thicker to the edges of the wood.


 I like to use a rag because it applies the paint unevenly and doesn't cover every bit of the previous colors.  I also don't wait for the paint to fully dry before I sand or add another layer of paint or stain.  I've found that if the paint is still slightly tacky when I sand, it's easier to get the worn barn wood paint look.  Keep layering paint, sanding, and glazing until you get the look you like, it's really quite fun!

You can read more about the metal accents here.

Now that it's all been figured out and I'm done, I don't know why I struggled with it so much at first.  It really wasn't that hard to finish in the end.  I guess some projects are just like that!


Pin It!

9 comments:

LifeLessOrdinary said...

Wow, I love that frame! Now I want to make one, ha. I really like the way you painted it too. Great job!

Shasta

JOY 2 JOURNEY said...

You did a GREAT job!

farmhouse-story said...

i LOVE your paint finish on this, janet! it looks great on your mantel, too! (i'm working on a project with chicken wire today:)

pooky said...

This s a fabulous find!!! I love the way this turned out. You did a perfect job on the weathered look. I have been itching to get my hands on some chicken wire...I think I'll look it up for prices. Tfs!

ANNE said...

Sweet! I love this idea!! Looks fabulous, too.

xox

Mandy said...

Hi Janet, this is my first visit to your blog! You did an amazing job on your "weathered look".

I would love for you to share this at a party that I have going on at Project Queen. I know that my readers would be interested to see this project and find out how you achieved the weathered look.

Great job!

Lauren @ My Wonderfully Made said...

It may have taken a long time but it sure turned out great -- love the metal accents!

Karen said...

It turned out so cute Janet! I love the chicken wire look with the frame. The weathered look you created turned out fabulous too. I hope you have a great Easter weekend!!

gail@My Repurposed Life said...

Great frame Janet! I love the color of it.. and the hardware pieces. I have a whole roll of chicken wire. It's on my to do list, just not sure what yet.
great mantel! :)
gail

LinkWithin

Related Posts with Thumbnails